DECORATIVE INOX BALLS

Stainless steel ball lightning rod machined 3 4 5 spheres used in the top of the house for lightning rods.

Stainless steel ball lightning rod for processing 3 4 5 stainless steel balls used in the top of the house for the lightning rod. Spherical stainless steel ball for lightning capture, top samples of the lightning rod, shape 3 large and smaller spheres on the top of the building, processing a set of 3 4 5 stainless steel balls used in the top of the house for lightning rod lighting. There are many stainless steel ball models used for lightning rods that TINTA processes stainless steel according to quality requirements with a 24-month warranty. The structure of the stainless steel ball used for the lightning rod is usually a tube between the heart and a chain of 3, 4, or 5 stainless steel balls together into a lightning collecting needle to attach the air-termination device to the tip. stainless steel ball for that lightning rod.

Structure stainless steel ball used for the lightning rods. Usually use non-stainless steel 42 pipes, 2 cups thick, 1.5 meters to 2 meters high, so that the height is just within reach so that it is easy to warranty and repair later but not too short, not beautiful. The bottom will be a 500 mm (50cm) non-sphere. Why use500 mm stainless steel sphere? Use the 500 stainless steel sphere to create the grandeur and look up at the top of the building will feel cool. Next is the non-300 stainless steel ball. To balance, the 300 mm stainless steel ball is gradually smaller and balanced with the 500 non-stainless steel ball. Above is the D150 stainless steel ball. With the stainless steel ball structure used for the lightning rod including 3 stainless steel balls, that is beautiful.

Stainless steel ball lightning rod on top of the building. Lightning rod, lightning ball, lightning protection system, direct and propagation lightning protection, surge protection against lightning impulse and propagation. Lightning rod, lightning ball, lightning protection system, direct and propagation lightning, surge protection against lightning impulse, and propagation to ensure safety = 0 resistance.

Lightning protection zone concept, lightning protection concept, direct and surge protection concept, Lightning protection zone concept

Sample stainless steel ball lightning rod. Solution for direct and diffuse lightning protection for factories

I. What is stainless steel ball lightning and lightning rod?

Stainless steel ball lightning rod. Lightning is a natural phenomenon that is caused by an electrical discharge between clouds with opposite charges or between clouds and a point on the ground or within a cloud when the atmospheric electric field is reached. a certain value. Vietnam belongs to a tropical climate, hot and humid, so it suffers from the influence of lightning. When two clouds with opposite charges are nearby, they discharge the charge, creating arcs. And people need the stainless steel ball lightning rod to neutralize it.

Standard stainless steel ball lightning rod to ensure lightning collection. The light emitted from that phenomenon is called lightning. If clouds fly near the ground and experience conducive environment such as buildings, factories, ... are higher than neighboring areas, sparks will occur between clouds. and ground. That is the phenomenon of lightning, if there is a lightning collecting needle with a stainless steel ball, the lightning rod will neutralize the lightning. Lightning currents are usually very high intensity, carrying very high temperatures, can cause dangers such as fire and explosion, causing damage to buildings, electricity, traffic, irrigation, industrial plants. , ...

The lightning rod stainless steel ball is required to protect the device. Electrical and electronic equipment in the building can also be damaged by the electromagnetic field of lightning current or propagating lightning current. In fact, every year, lightning has destroyed many works and natural disasters cause death for people.

II. Classification of lightning strikes and stainless steel lightning balls for protection purposes
1. Classification of lightning strikes and stainless steel ball lightning arrays
Based on the location and characteristics of lightning strikes, three different types of lightning are distinguished. These are direct lightning, indirect lightning, and induced lightning.

- Lightning struck directly on the stainless steel ball, a lightning rod is a type of lightning that hits the building, factory, ... in places with a higher position than the surrounding ground, which is the stainless steel ball of the lightning rod. This is the most dangerous type of lightning strike. Because the lightning current hits buildings, houses, and people with very high intensity and temperature, it causes huge destruction.

- Lightning hits the stainless steel ball, lightning rod indirectly is a type of lightning that hits power lines, telephone lines, ... somewhere and then spreads along the line to the building, damaging electrical and electronic equipment, Information technology is connected with wires.

- Lightning induction on stainless steel ball lightning rod is divided into two types: electrostatic induction and electromagnetic induction. Electrostatic induction lightning will create small electric sparks and easily cause fire and explosion disasters when it is exposed to environments such as gasoline, chemicals, gas, ... Magnetic impulses can create electrical impulses, harmonics that are dangerous to electronic equipment.

2. Stainless steel ball lightning rod and lightning protection purpose for the plant

Installation of stainless steel ball lightning rod for the factory. A manufacturing plant is a place where systems, electrical, electronic, thermal, mechanical, information technology, control, and automation systems work continuously. In addition, the factory is also home to many sources of materials and products that are prone to fire and explosion such as oil, gas, gas, carton box, ... These systems and equipment are easily damaged by overvoltages caused by lightning impulses propagating from power, telecommunications, and control lines caused by induced lightning strikes, as well as damage by direct lightning strikes. Therefore, the construction of the system with stainless steel ball lightning rod or a lightning protection method for the factory system is an important and necessary job.

Supply stainless steel ball lightning rod. Equipping lightning protection system directly with stainless steel ball, lightning rod or transmission for the factory will ensure safety for people and equipment. At the same time, it ensures continuous and efficient operation of production, transaction, and service provision activities, minimizing human and property losses.

Stainless steel ball pillar lightning rod machined 3 4 5 spheres used in the top of the house for the lightning rod. TINTA processes stainless steel spherical ball patterns for lightning-fast lightning arresters, top models of lightning rods, large, small, and smaller spheres on the top of the building, processing sets of 3 4 5 spheres used in the top of the building for the Lightning lightning rod.

Tag: stainless steel ball lightning rod, stainless steel ball lightning rod, stainless steel ball lightning rod, stainless steel ball lightning rod, stainless steel ball lightning-fast, stainless steel ball lightning, stainless steel ball lightning, ball 201 stainless steel ball, 304 stainless steel ball, 300 stainless steel ball, 400 stainless steel ball, 500 stainless steel ball.